Air Infiltration (Air Leakage)
The amount of air leaking in and out of a building through cracks in walls, windows, and doors.
A measure of the rate of air-leakage around a window or door in the presence of a specific pressure difference. The lower a window's air-leakage rating, the better its airtightness.
An inhert, colorless, nontoxic gas used in insulating glass units to reduce heat transfer.
A window in which the sash is hinged at the top and opens by pivoting outward from the bottom using a crank handle.
A mechanism used in single and double hung windows as a means of counterbalancing the weight of the sash during opening and closing.
Traditionally made from three units with one large picture window flanked by two operating windows. The most popular combinatons consist of double hung or casement style flanking windows. All the units can be stationary, operating, or any combination of the two.
The bottom horizontal part of a window sash.
Traditionally made of four or more windows joined together to form a delicate arch. A Bow can consist of any combination of windows.
Cable Support Kit
A hardware set designed to anchor a bay or bow window to a structure. The kit supports the projecting portion of the window and prevents sagging.
Call Size (Catalog Size)
A manufacturer's reference number used to identify window and door dimensions.
A casement window is hinged on either side so the sash opens outward in a swinging motion to provide maximum ventilation.
A deposit of water vapor which occurs when excess humidity in warmer air is released as water droplets onto a colder surface.
Heat transfer through a solid material, wherein heat flows from a higher-temperature area to a lower-temperature area.
This is a double-hung or single-hung window with an unequal top and bottom sash where the bottom sash is greater in height than the upper sash.
Used in casement or awning windows, this handle has an arm and no assembly.
Design Pressure (DP) Rating
A method of specifying window performance which measures a product's ability to withstand air and water forces, in negative and positive directions, while the window or door remains closed and locked.
Divided Light (Divided Lite)
A window opening with a number of smaller panes of glass separated and held in place by a grid system.
Two pieces of glass separated by an air space to improve insulation against heat transfer where the air between the glass sheets is completely dried and the space is sealed airtight.
Double Hung Window
A window consisting of two sashes operating in a master frame where both the upper and lower halves slide vertically past each other and both tilt in for cleaning.
Type of hinge used in casement windows which allows for a wider opening to meet emergency exit requirements.
Space between the top of the sill of the master frame of an open window, the bottom part of a raised sash, and the space between the jambs of the opening. Depending on location, the most popular requirement is a net clear opening of 20" wide by 24" high and not less than 5.7 square feet.
Independent government program responsible for developing a standard set of guidelines designed to recognize the energy efficiency of various products including windows and doors.
The process of producing vinyl or aluminum shapes by forcing heated material through a die. An item made by this process.
Two or more window units attached together at the manufacturing facility.
The placement of window and door openings in a structure wall.
The non-operating panel of a slider window or sliding door.
Folding Crank Handle
Hardware with an arm and knob assembly where the handle folds down when not used. Common in casement windows.
A screen which fills the entire window opening.
The process of joining vinyl window or door frames and/or sashes which entails the heating of each piece individually then joining them until bonded together. This eliminates water and air infiltration.
A box-shaped window with a slanted glass roof, typically with a glass shelf, which projects from the side of a structure and can be used as a miniature greenhouse.
The glass panes in a window, door, or skylight.
Pieces of molding around the inside of a window sash or frame which hold the glass unit in place.
Decorative grids on the interior or exterior surface of the glass, between glass panes, or in any of these combinations which divides a glass unit into smaller openings to create any number of lites.
Grids Between The Glass (GBG)
A window or door option where grids are placed between panes of insulating glass.
A type of screen which covers only one half of the window, common in single and double hung as well as slider windows.
The upper horizontal part of a window frame.
Transfer of heat from the outside to the inside of a structure through all surfaces.
Transfer of heat from the inside of a structure to the outside through all surfaces.
A window where the sash is hinged at the bottom and pulls inward for opening.
Horizontal Slider (Slider)
A window where one or both panels slide horizontally past each other.
ICC (International Code Council)
A national organization which publishes model codes for adoption by states and other agencies. Codes include the International Building Code (IBC) and the International Energy Conservation Code (IECC.)
See Air Leakage.
Insulating Glass Unit
Two or more panes of glass spaced equally apart and hermetically sealed, forming a single glazed unit.
Integral Nailing Fin
An integral nailing fin is part of the master frame of a New Construction window. It aids in the ease of installation as well as offering increased strength and stability.
An upright frame member of a panel in a window which engages with a corresponding member in an adjacent panel when the window is closed. An interlock on a window or door provides a hooking action between the sash rails reducing air infiltration and increasing security. (An overlap)
An optional extrusion part on a New Construction master frame which allows for a home's siding to slip between the trim and nailing fin. It allows for easier installation since there is no need to finish the siding edge.
The vertical part at either side of a window frame or the horizontal part at the top of the window frame.
Wood, most commonly, attached to the inside edges of the window or door to extend its width and adapt it to a thicker wall.
A bracket employed as a latching point in locking hardware.
Describing the final product as unassembled, most commonly a patio door.
An inert, odorless, nontoxic gas used in insulating windows to reduce heat transfer. Less common and more expensive than Argon Gas.
Two or more panes of glass bonded together with a layer of plastic in between.
The bottom part of the sash on a double or single hung window designed with an integrated method of lifting the operating sash.
When glass in a window or door is divided by a grid into multiple smaller openings, those openings are called lites.
A horizontal beam above a window or door opening which supports the weight of the wall above the opening.
Low-Emittance Coating (Low-E)
Microscopically thin, virtually invisible, metal or metallic oxide layers deposited on a glazing surface primarily to block harmful ultravioulet (UV) rays and the sun's infrared heat. Homes with Low-E glass stay cooler in the summer and warmer in the winter.
A window in which the corners are assembled using screws as opposed to a welded corner construction.
The part of a window or sliding door where two panels meet.
A part used to structurally join two or more window or door units.
Two or more window or door units joined together
Multipoint Locking System
A locking system where there is more than one locking point.
Nailing Fin (Nailing Flange)
An integral part of a New Construction window or patio door master frame which usually overlaps the stud and through which nails are driven to secure the frame in the opening.
National Fenestration Rating Council (NFRC)
The NFRC is an independent third-party certification organization with industry-accepted standards for evaluating and certifying energy performance. The NFRC Certificate contains U-Factor, SHGC (Solar Heat Gain Coefficient), and VT (Visible Transmittance) values. These values form the basis for the ENERGY STAR Door and Window Program.
Any Textured glass, usually frosted, used for privacy while still allowing light to penetrate.
Any type of window which can be opened for ventilation.
Crank-operated hardware used in opening and closing casement windows.
This is a double or single hung window with an unequal top and bottom sash where the top sash is great in height than the lower sash.
A single sheet of glass.
The component of a sliding glass door, consisting of a glass unit in a frame installed within the master frame of the door. May be stationary or active.
A fixed window which does not open for ventilation.
A measure of the resistance to heat flow. A window with a high R-Value has a greater resistance to heat flow and a high insulating value.
Horizontal part of a window sash.
Adding or replacing items on existing structures.
The opening in a wall into which a door or window is to be installed.
The part of a window which includes the glass unit and the frame sections directly attached to it.
Woven metal, plastic, or fiberglass mesh stretched over a frame which sits inside the master frame of the window or door and permits air to pass through while stopping insects.
Loss of the airtight seal in the insulated glass unit which results in fogging between the glass planes.
A board cut to fit the contour of a Bay or Bow window which provides a seat or shelf space.
The lowest horizontal part of a window or door frame.
Simulated Divided Lights (SDL)
A window or door unit with the grilles placed between and on the glass surface which has the appearance of a number of smaller panes of glass in one frame.
A single pane of glass in a window or door.
A window consisting of two sashes where the upper sash is fixed and the bottom sash moves up and down as well as tilts in for cleaning.
Glass with a thickness between 0.085" and 0.100" (2.16 - 2.57 mm.)
A roof window which gives light and, if it is operable, ventilation.
A window consisting of two or more sashes which operate by sliding horizontally past each other.
Sliding Glass Door (Patio Door)
A door consisting of two or more panels which move horizontally on a track. Usually only one of the panels is active and moves in a rolling rather than sliding motion.
Solar Heat Gain Coefficient (SHGC)
The measurement of solar radiation emitted through a window expressed as a number between 0 and 1. The lower a window's solar heat gain coefficient, the less solar heat it transmits.
A material which separates the panes of glass to create the airspace in an insulating glass unit.
A defect resulting from a stress condition originating at a point along any of the edges of a piece of glass.
Glass which is strengthened by reheating it to just below the melting point and then suddenly cooling it. This process gives it the ability to break into small pieces when shattered making it ideal for safety glazing in patio and entry doors, side lights, and other hazardous locations.
A barrier between elements of high conductance which reduces the flow of heat. This is often used in aluminum windows.
A dimensional change in a material due to temperature changes.
Mechanism at the top of each sash which allows for inward movement for cleaning as well as removal purposes.
Glass colored in the manufacturing process by the addition of a mineral admixture.
A window above a door or another window, usually non-operable.
Three pieces of glass separated by two air spaces to improve insulation against heat transfer where the air between the glass sheets is completely dried and the space is sealed airtight.
True Divided Lite
A window opening comprised of multiple individual smaller panes of glass separated by grilles.
A measure of the rate of heat loss through a window or door. The lower the U-Value, the greater a window's resistance to heat flow and the better its insulating value.
A decorative pattern which is "grooved" into the glass using a special process.
A thin sheet or layer of wood.
Extrusions which are produced from virgin vinyl with no regrind added.
Visbile Transmittance (VT)
The percentage of available light which comes through a window. The higher the VT, the more daylight comes in.
Use of low-conductance spacer materials to reduce heat transfer near the edges of insulated glass units.
What happens when an object is twisted out of shape.
Variously shaped material which covers the joints between the sashes and master frame reducing air and water infiltration.
A small opening in a window or door sill through which water may drain to the building exterior.